DANTA® Careers — Bengaluru, India
Engineer
what’s next.
Advanced composites. Automated manufacturing. Aerospace and defence engineering.
- 01Automated Fiber Placement
- 02Composite materials & process
- 03Structures & simulation
Fig. 01 — Procedural study of fibre trajectories on a doubly curved surface. Not a product.
01Opportunities
Open positions
- DNT-JOB-0012Manufacturing TechnicianHands-on composite manufacturing — preparing materials and tools, carrying out precise work to controlled procedures, and inspecting what you build.ProductionBengaluru, IndiaFull-time · On-siteView vacancy
- DNT-JOB-0011Quality EngineerBuild quality into composite manufacturing — inspection planning, traceability, non-conformance handling and process control from the first build onward.QualityBengaluru, IndiaFull-time · On-siteView vacancy
- DNT-JOB-0010Mechanical Design and Tooling EngineerDesign the tooling, fixtures and mechanical systems that composite manufacturing depends on — from 3D CAD through to drawings a toolroom can build from.EngineeringBengaluru, IndiaFull-time · On-siteView vacancy
- DNT-JOB-0009Structural Analysis EngineerAnalyse composite structures — building and checking finite element models, sizing laminates, and reporting results that design and manufacturing can act on.Structural AnalysisBengaluru, IndiaFull-time · On-siteView vacancy
02Engineering focus
Composite structures, built by machine, tow by tow.
DANTA is developing advanced composite manufacturing capability with an Automated Fiber Placement-led strategy. Building that capability is the work.
Engineering at DANTA- 01
Automated Fiber Placement
DANTA's manufacturing strategy is AFP-led: composite laminates built tow by tow, by machine, along programmed fibre paths. The work spans toolpath planning, process parameters and placement quality.
- 02
Materials and process
A laminate is only as good as its process. That means understanding how carbon-fibre materials are stored, handled, laid up and cured — and controlling each step so results repeat.
- 03
Structures and simulation
Fibre angles, ply stacks and geometry decide how a composite part carries load. Analysis and simulation connect what is designed to what can actually be manufactured.
03The work
Problems worth an engineer’s time
01
Toolpath and trajectory planning
Steering tows across curved tooling without gaps, overlaps or wrinkles.
02
Process development
Finding the parameter window — and proving it holds from one build to the next.
03
Robotic manufacturing
Programming, simulating and commissioning automated equipment.
04
Laminate and structural design
Choosing fibre angles and ply stacks for the loads a part must carry.
05
Tooling and industrialisation
Designing the moulds, fixtures and handling that make production possible.
06
Inspection and quality
Deciding what to measure, how to trace it, and what to do when it deviates.
04Disciplines
Careers by discipline
Counts show vacancies that are published now. A discipline without open positions is not hiring at present.
- Engineering1 open
- Advanced Manufacturing1 open
- Composite Materials1 open
- Structural Analysis1 open
- Quality1 open
- Production1 open
- OperationsNone open
- CorporateNone open
05Process
How we hire
01
Application
You apply for an approved vacancy.
02
Initial review
We review eligibility, experience and evidence.
03
Technical evaluation
You may complete a relevant technical assessment.
04
Interview
The hiring team evaluates skills and role fit.
05
Decision
DANTA records its decision and tells you the next steps.
06Talent community
No suitable vacancy today? Stay on our radar.
Register your discipline and CV. With your consent, DANTA may contact you when a relevant position opens. You can withdraw at any time.
Build what comes next.
See the positions DANTA is hiring for now, read what each role involves, and apply in a few minutes.